Something Hit the vertical tail fins during a hard landing (nose in and backward, I was in panic mode)
The tail blade hit the vertical fins! making a big noise. I stop everything to check was going on
A: hit the ground
B: hit the vertical fins
Decide to replace it with a raptor 30 bin, white, bigger and stronger
Draw a line and cut with any tool you add, be careful not to cut yourself in the finger.
You must adapt, in order to fix it into the tail case of the caliber
  • Heavier, will help some unbalanced heli to add weight in the tail,
  • White: better visibility
  • Stronger and not so flexible, althrough, I recommend you to use te raptor 60 fins instead
    or the new V2 fins which are even tougher.

You might like also

Frame bracing mod
The frame is weak in places and needs some bracing when using the CCPM option to hold the servo tray from flexing. These arrangements eliminate the play on the cyclic/collective controls and gives a more rigid frame. Solution 1 by CK_ Solution 2 by d-n-jensen Solution 3 by Dominic Girard Braces under the radio tray, it's homepage is at: Tray Flex solution Picture by John, website     …
5581 Days ago
Quest for the missing screws
.. .. In Red, existing screw in ARF Kit In blue, missing screws. Hole is prepared for them but empty Do not forget to replace with the same "set screw" to avoid unbalanced tail rotor! …
5581 Days ago