Assuming is required, the following results were found.

  • Car Survey

    https://cedricwalter.com/index.php/component/newsfeeds/newsfeed/336-lifestyle/11-car-survey?Itemid=21
  • .50 Conversion

    The Conversion kit contains: Longer Tail Pipe (anodized blue) Longer Tail belt Solid engine mounts (anodized blue) in 2 parts Clutch shaft to suit 46-50 engine. Where to Buy it? RC Advisor Champ (Japan). www.rc-champ.co.jp . The kit is part #41283...

    https://cedricwalter.com/index.php/all-my-hobbies/31-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-upgrades/18-50-conversion
  • 90 deg. CCPM

    90 deg. CCPM by CK_ When in MMS mode, move the link from the blue ball to the red ball. Do this on both side of the swashplate. All credit to CK_ " As for the 90 deg. CCPM, here's why I did it. I started with the stock 120 deg. CCPM with 3 9202s. If I...

    https://cedricwalter.com/index.php/all-my-hobbies/29-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-rotor-head/23-
  • Dual Battery system

    Overall view of my 1st caliber 24.08.2002 Add a dual battery system for more safety. I have no heli with only one battery. Here is why: Problems 1 battery pack 2 packs + mechanic Switches 2 packs + Electronic switch Additional cost of system reference...

    https://cedricwalter.com/index.php/all-my-hobbies/25-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-security/26-
  • Flip the head, change the delta3 angle

    This suppress wooble, even down to 1200 rpm. As usual, do this mod only if your heli encounter wooble, mine never develop this. "Flip the washout, grips, flybar control arms, and the bell mixing arms. If you use the stock washout you need to remove the...

    https://cedricwalter.com/index.php/all-my-hobbies/29-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-rotor-head/38-
  • Media Center with XBMC

    HowTo transform your xBox into a Media Center with XBMC XboxMediaCenter is a free open source (GPL) multimedia player for the Xbox™ from Microsoft. Currently XboxMediaCenter can be used to play/view most popular video/audio/picture formats such as...

    https://cedricwalter.com/index.php/gadget/48-xbox-mediacenter/howto/58-
  • Généralités, Equipements, Sécurité

    Généralités Une moto qui tombe a l'arret sur le coté ou en roulant est une moto quasiment foutue, les cache cylindre vont prendre un tel coup que pour peu que ce soit un modele ancien, votre moto sera déclarée épave. Solution? des roulettes pour 100€...

    https://cedricwalter.com/index.php/all-my-hobbies/51-honda-hornet/quelques-conseils/60-
  • Repairing the frame

    broke after a crash, main mast is not bent, but energy release through the frame . I do not want to disassemble the whole frame but fix it instead.

    https://cedricwalter.com/index.php/all-my-hobbies/28-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-repairing/25-
  • What to lubrificate?

    Each week, you can add a drop oil in the red places, switch you helicopter on, and do not forget to move corresponding servo while adding oil. I'm using stich machine white Vaseline.

    https://cedricwalter.com/index.php/all-my-hobbies/26-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-maintenance/19-
  • Upgrades that really bring something

    Swashplate, suppress a lot of slope found in the original one. Metal fan, The Correct do not seem to have a better cooling effect, wait till QuickUk release a better version. Metal clutch bell,... Other upgrades are not recommended since in case of...

    https://cedricwalter.com/index.php/all-my-hobbies/31-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-upgrades/20-
  • Starter coupling wear out the hex ball and the socket

    Symptoms : Starter coupling does not last long. (CA3018) Hex adapter from the starter is also rounded Reasons Starter coupling is made of a soft metal. Hex starter is sliping at each start and round the starter coupling Cure : Change the part CA3018...

    https://cedricwalter.com/index.php/all-my-hobbies/30-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-troubleshootings/21-
  • Main 92 T gear keeps getting striped.

    Symptoms : Main 92T gear keeps getting stripped. Teeth broke in the main gear by just doing a fast descent Reasons The one way bearing will sometimes slip, and then catch again. This allows the engine to rev, and when the the bearing grips again, the...

    https://cedricwalter.com/index.php/all-my-hobbies/30-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-troubleshootings/22-
  • Repairing the radio tray

    you can use this technique on all NON MOVING plastic parts, It is even better if you use clothes wires and glue them with CA (as best as carbon fibers)

    https://cedricwalter.com/index.php/all-my-hobbies/28-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-repairing/24-
  • Clean one way bearing

    "Take out your one way bearing in the counter shaft bearing and clean it out real good. I had my one way bearning start sliping on me this weekend and at one point it completly let go and I had to auto down. When it had happend I couldn't tell what was...

    https://cedricwalter.com/index.php/all-my-hobbies/26-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-maintenance/28-
  • My homepage is in a transition phase

    My homepage is in a transition phase, I plan to use a CMS content management system in the future : http://mamboforge.net/ "Mambo is a business-oriented open source content management system written in PHP and uses the MySQL database. Initially...

    https://cedricwalter.com/index.php/miscellaneous/8-news/latest/29-
  • My provider encounter an internal hacker attack

    My provider encounter an internal hacker attack (around 12.08.2004), this lead to the destrcution of 75 homepage, including mine. Fortunately, I've made a backup the day before because of Mambo's installation....My objective is to transform this...

    https://cedricwalter.com/index.php/miscellaneous/8-news/latest/30-
  • Links to other tips page

    Clive Woods' Caliber 30 Tips Alessandro Salsetti (FR) son experience

    https://cedricwalter.com/index.php/all-my-hobbies/24-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30/32-
  • Danger part ca3035 main mast stopper caliber 30

    Kyosho part CA3035 Some parts right out the bag are prone to break. Verify yours and replace them wth a raptor 30 if needed! "Almost directly accross from where the set screw is installed was an imperfection in the aluminum. I pulled on the part with...

    https://cedricwalter.com/index.php/all-my-hobbies/25-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-security/34-
  • Clic clic noise coming from tail rotor case (periodic noise)

    Verify that the tail drive pulley (red part 934 & 965) is not loose (1degree or 2degrees rotation is enough to create noise!) on the tail pulley holder (blue part 935). Disassemble the red part and look if there is not too much black dust on the blue...

    https://cedricwalter.com/index.php/all-my-hobbies/25-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-security/35-
  • Loose screws in ARF kit

    I lost 2 screw (3x6mm) in flights ! crazy they are located in manual page 7, stage 952. The heli produce a metallic noise but I throught it was going from the exhaust. The person on this page report the same problem :...

    https://cedricwalter.com/index.php/all-my-hobbies/25-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-security/36-
  • Stiffen the Head

    "Added a 1/4' long rubber tube (from the xcell fury for example) onto the spindle center to give it a pivot point just like the Fury has. It stiffend the head some and it will still hovers great." (by d-n-jensen )

    https://cedricwalter.com/index.php/all-my-hobbies/29-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-rotor-head/37-
  • Frame bracing mod

    The frame is weak in places and needs some bracing when using the CCPM option to hold the servo tray from flexing. These arrangements eliminate the play on the cyclic/collective controls and gives a more rigid frame. Solution 1 by CK_ Solution 2 by...

    https://cedricwalter.com/index.php/all-my-hobbies/32-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-frame/39-
  • Glue your grips on the blade !

    Mark the edge of the black plastic part with a pen before removing Thunder Tiger recommend you to glue your blade with epoxy glue. Kyosho say nothing in the manual about this subject. I agree that the Caliber 30 has 4 screws vs only 2 for the raptor...

    https://cedricwalter.com/index.php/all-my-hobbies/25-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-security/40-
  • Replace flexible vertical fins on kyosho caliber 30

    Something Hit the vertical tail fins during a hard landing (nose in and backward, I was in panic mode ) The tail blade hit the vertical fins! making a big noise. I stop everything to check was going on A: hit the ground B: hit the vertical fins Decide...

    https://cedricwalter.com/index.php/all-my-hobbies/32-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-frame/41-
  • Engine overheating cure

    Symptoms : Engine overheating Loss of power even if the motor smoke a lot Why? it really depends... Where You are living....in the desert? do not forget that some gyro may have trouble too and may drift a lot if the day is too warm (more than 35°C)....

    https://cedricwalter.com/index.php/all-my-hobbies/27-rc-helicopter/kyosho-caliber-30/faqs/kyosho-caliber-30-motor/42-

Results 1 - 25 of 1000